Filter
Top Products
23
Clock, timer and automatic switch-o
Setting the clock
When the oven is first connected, or after a power failure,
‘0
.
00’ will flash on the display.
To set the clock, push the
button, then the or
buttons.
Using the timer
The timer can be set for a maximum period of 99 minutes and 50 seconds.
To set the timer, push the
or button until you have set the required time.
Once the pre-set time has elapsed, the timer will beep (for up to seven minutes). Push the
button to turn it off.
Important!
Note: you can only use the timer if the oven is not in use (on stand-by). If the oven is cooking, it will turn off
when the pre-set time has elapsed.
Cooking with automatic switch-off
This automatically stops the cooking after a pre-set time, for a maximum period of 99 minutes
and 50 seconds.
To set the cooking time, push the or button until the display shows the required time. The
symbol AUTO will show in the display.
Adjust the oven temperature.
The oven will immediately start to operate, and will cook for the pre-set time. The display counts
down the time remaining.
Press the button to see the time.
Once the pre-set time has elapsed, the oven will switch off, the symbol AUTO will go off, and the
timer will beep (for up to seven minutes). Push the
button to turn it off.
Setting the timer volume
You can choose between three levels of volume for the timer beeps. To adjust the volume:
1 Check the clock is set and the timer is not running.
2 Press and hold the
button. The timer will beep.
3 Release the
button and re-press to hear the next level of volume. The last level selected
is stored.
Note: if the power to the oven is cut, then the beep volume will reset to the loudest level.
Fig. 23 Clock display and
control buttons
FOUR-FUNCTION SINGLE MODELS