Filter
Top Products
47
Care and cleaning
Fig.50a
Fig.50b
Fig.50c
D
E
F
G
A
H
Fig.50dFig.50e
Fig.50f
3
Replace the inner pane:
Check that the four rubber pads are in
place (“D” in Fig. 50a).
Check that you are holding the pane the
correct way. You should be able to read the
wording on it as it faces you.
Insert the pane in the left “E” and right “F”
slide guides (Fig. 50b), and gently slide it to
the retainers “H” (Fig. 50c).
Replace the seal “G” by hooking in the
three fixing hooks. Make sure that you put
it in the correct way (Fig. 50e)*.
4
Unlock the oven door by opening it
completely and closing the lever “A” on the
left and right hinges (Fig. 50d).
*Lower oven doors in tower models do not
have a seal.
Note: Single oven doors and upper oven
doors in tower models have a gap between
the top edge of the inner glass and the
sealed gasket. This is to allow air circulation
(Fig. 50f).