46
Care and cleaning
Fig.49a
Replacing the middle and inner
panes of glass
1
Make sure the door is locked open
(see Figs 47a - 47c).
2
Replace the middle pane:
Check that the four rubber pads are in
place (“M” in Fig. 49a).
Check that you are holding the pane the
correct way. You should be able to read the
wording on it as it faces you.
Gently insert the top edge of the pane into
the top clamps (arrow 1 in Fig. 49b), then
lower the pane and insert the bottom edge
into the bottom clamps (arrow 2 in Fig.
49b); and then slide the pane into position
(Fig. 49c).
Fig.49b
Fig.49c
M
1
2
1