Filter
Top Products
15
Installation instructions
Replacing the injectors
If the injectors are not supplied, contact
your nearest Fisher & Paykel Authorised
Service Centre.
To replace the injectors:
1
Remove the trivets and burners from
the cooktop.
2
Using a spanner, remove the injectors
(Figs.14a,14b,14c) and replace them
with the ones according to the gas
type (see the ‘Table for the choice of
injectors’).
3
Fix the warning label (supplied with the
conversion kit) at the back of the cooker,
near the gas inlet connections. This label
states that the gas cooktop has been
converted for use with LPG/Natural gas.
The burners are designed so that
adjustment of primary air is not
required.
Injector
Injector
Dual burner
Triple ring wok
burner
Semi-rapid
burner
Injector for inner crown
Injectors for
outer crowns
Fig. 14a
Fig. 14b
Fig. 14c