Filter
Top Products
17
Installation instructions
Table for the choice of injectors
(*): Power calculated with inner crown operating.
(#): Power calculated with inner and outer crowns operating.
Lubrication of the gas valves
The gas valves should only be lubricated by a qualified technician.
Important!
All installation, maintenance and conversion of the appliance must be done using original factory parts.
The manufacturer declines any liability if these correct parts are not used.
Natural gas LPG
Test Point Pressure
[kPa]
1.0 2.75
BURNER
Injector Orifice
Dia. (mm)
Gas
Consumption
[MJ/h]
Injector Orifice
Dia. (mm)
Gas
Consumption
[MJ/h]
Semi-rapid 1.12 6.30 0.70 6.30
Triple-ring wok 1.60 12.70 0.95 11.90
Dual
inner crown 0.85 (no.1 central) 3.60 (*) 0.50 (no.1 central) 3.20 (*)
outer crowns 1.15 (no.2 outer) 16.00 (#) 0.62 (no.2 outer) 13.00 (#)