Filter
Top Products
25
25
4
ABNORMAL SITUATIONS AND/OR OPERATION PROBLEMS
during cooking or the self cleaning cycle
1. “F000” or “F001” appear during cooking or self cleaning cycle
Oven temperature sensor is broken or not working properly. The cooling fan
stays on and if the self cleaning cycle is in progress the door remains locked.
What to do:
• Turn the function selector to
OFF
(oven OFF).
• Wait for the oven to cool down completely and disconnect the cooker from the
mains.
• Reconnect the appliance to the main.
If after this procedure the display still reads “F000” or “F001”:
• Disconnect the cooker from the mains.
• Call Customer Care. The cooker must not be used.
2. “F0E0” and “A” appear during the self cleaning cycle
This indicates a temperature sensor measurement error during the self cleaning
cycle. This may be due to the self cleaning cycle being stopped and started
again when it was quite a way through.
What to do:
• Turn the oven selector dial to
OFF (oven OFF).
• Wait for at least 30 minutes before repeating the operations to start the self cle-
aning cycle.
• If the message is still given after several attempts call Customer Care.
3. “FPot”, “Fdor”, “FAdc” or “FrEL” appear during cooking or self cleaning
cycle
This indicates an error or malfunctioning.
What to do:
• Turn the function selector to
OFF
(oven OFF).
• Wait for the oven to cool down completely and disconnect the cooker from the
mains.
• Reconnect the appliance to the main.
If after this procedure the display still reads “FPot”, “Fdor”, “FAdc” or “FrEL”:
• Disconnect the cooker from the mains.
• Call Customer Care. The cooker must not be used.
4. Display OFF
Oven not working properly.
What to do:
• Turn the function selector to
OFF
(oven OFF).
• Wait for the oven to cool down completely so that the door opens.
• Switch the cooker off for a few seconds.
If after this procedure the display is still off:
• Disconnect the cooker from the mains.
• Call Customer Care. The cooker must not be used.
A
A
A
A
1
2
4
3
A
A
A
A