Filter
Top Products
52
Error codes on the cooking zones display
Error code Example What to do
Erxx
or
Ex
(not E2 or EH)
or
display
not operative
1 Switch off the cooker and disconnect it from the
mains.
2 Wait for about 1 minute, then reconnect the
cooker and turn on the cooking zones.
3 Wait for about 1 minute and if the error message
does not appear again the cooking zones can be
used.
4 If the error message does not disappear repeat
step from 1 to 3.
5 If the problem continues do not use the
induction cooktop (only use the oven) and
contact your Authorised Service Centre.
E2
or
EH
‘E’ and ‘2’ alternating for one or more cooking
zones.
This indicates an overheating of the cooking
zone/s.
1 Switch off the cooking zone/s and leave to cool.
2 If the problem continues do not use the
induction cooktop (only use the oven) and
contact your Authorised Service Centre.
E6
or
display
not operative
The cooker has been incorrectly connected.
The appliance should be connected to the
appropriate power supply by a qualified
technician.
Symbol
as per
side
gure
This indicates an incorrect operation of one or
more cooking zone control dial.
1 Turn the cooking zone control dials to the ‘0’
(Off) position, then switch off the cooker and
disconnect it from the mains.
2 Wait for about 1 minute, then reconnect the
cooker and turn on the cooking zones.
3 Wait for about 1 minute and if the error message
does not appear again the cooking zones can be
used.
4 If the error message does not disappear repeat
step from 1 to 3.
5 If the problem continues do not use the
induction cooktop (only use the oven) and
contact your Authorised Service Centre.
Cooktop fault codes