Filter
Top Products
SECTION 3
DO NOT push against
the middle of the drawer.
The DishDrawer should
not support any part of
the kitchen cabinetry.
WARNING
Make sure the inlet and
drain hose and main flex
are not restricted or
damaged by carefully
pulling them through the
Services Hole as the
DishDrawer is being
pushed back into the
cavity.
IMPORTANT
WARNING
INSERTING DISHDRAWER INTO CAVITY
3.1.1
Position product to suit joinery ensuring
hoses are not kinked or cut.
3.1.2
Insert M8 bolts and washers through holes
in shelf.
3.1.3
Ensure product is correctly positioned and
aligned before tightening.
Refer to Step 7.1 - Installation Wet
Test.
Page DS_10