Filter
Top Products
SECTION 2FITTING THE DISHDRAWER
Ensure the cavity is at
least 22
7
/
8
" (580mm) deep.
TIP
STEP 2.1 DISHDRAWER MOUNTING HOLE LOCATIONS
2.1.1
Draw the cavity center line on the
supporting cabinetry.
2.1.2
Center Template in cavity using V-notch
on the front of the Template.
2.1.4
Mark and drill four
15
/
32
" -
9
/
16
"
(12mm-14mm) diameter holes as
described on Template.
2.1.3
Align front of Template to suit surround of
cabinetry.
IMPORTANT
For Integrated product
with door thickness other
than
3
/
4
(18mm), the
Template position must be
adjusted forward or back
to allow for this
difference.
Page DS_06