Filter
Top Products
This publication is
intended to acquaint
you with the correct use of
this ice machine and with
the care that is required for
trouble free operation and
optimum performance. It is
important to adhere to the
instructions indicated. We
suggest that you
thoroughly read this
manual, paying close
attention to the warnings
and advice that are given. Whenever
communicating with the manufacturer
about your machine, always indicate the
model and serial number.
english
GB
2
Important:
Carefully read this user manual before installing
the machine.
Warning
Disconnect the electrical power before beginning
any maintenance or cleaning operation.
2
preface
General Information
at Delivery
1
Please note the
following guidelines:
●That the packing
does not show any
sign of damage.
●That the unit
corresponds to what is
specified on the
purchase order.
●That the machine is not damaged externally and
no parts are missing.
●That during transport certain integral parts have
not been damaged.
In case of severe damage or parts missing, report
immediately to the delivering carrier and your
distributor.
The illustrations shown in this manual are generic
and can differ in some details from the delivered
machine.
Any illustration, schematic or documents supplied
with the machine belong to the manufacturer
who reserve copyright and expressly forbids any
reproduction of them without written permission.
The Manufacturer's policy is one of continuous
improvement and reserves the right to make
changes at any time without prior notice or
incurring any obligation whatsoever.
unit description
3
The units described in this
manual are self-contained
cube ice makers, namely
with a built in ice
storage bin.
A percentage of ice
production capacity can be
stored in the self contained
bin in which a sensor
controls the collected
ice level.
When this control is in contact with the stored ice,
the thermostat cuts-off the unit operation.
Another thermostat controls all the process
sequences of the machine related to ice making and
release of ice cubes.
safety instructions
4
For the correct unit
operation you must
carefully read this
manual and adhere to
its instructions, by
doing this your
machine will operate
safetly and last for
several years to come.
If in any doubt you
should contact your local distributor.
The Manufacturer
accepts no responsibility
whatsoever for any
damage or injury to
people resulting from
the non-observance of
the safety instructions.
11
Attention
Maintenance and
cleaning operations must
be performed by
authorised service
agents.
13
Never push or drag it.
6
Make sure your hands
are properly wiped dry.
The electrical isolator
switch must be within
hand reach of the
installed machine.
The water shut-off valve must be within hand
reach of the installed machine.
8
Important
Do not remove any
service panel secured
with screws.
5
If the unit is to be
moved, be sure to lift it
rather than damage the
levelling feet.
12
Make sure that the
cabinet is connected to a
mains electrical supply
complete with an earth
connection.
14
7
9
10
transport
15
As transport protection the ice
maker is packed in a heavy
cardboard crate.
For moving the packed
unit to site use a fork lift
with forks no thicker
than 40mm.
16
17
For the unpacking
of the unit observe
the pictorial view.
Make sure and locate
the ice scoop inside the
ice storage bin. Make
sure water and drain
pipes are inside the ice
storage bin.
18
15
DISPOSAL REQUIREMENTS
If not disposed of properly all refrigerators have components that can be
harmful to the environment. All old refrigerators must be disposed of by
appropriately registered and licensed waste contractors, and in accordance
with National laws and regulations.