Filter
Top Products
8
DOOR REMOVAL
If door must be removed:
• Unplug the unit or switch the breaker that
supplies power to the unit to the
off position.
• Remove the plastic top hinge cover.
• Hold the door in place while removing the
top hinge from the cabinet.
• Remove the two 3/8” hex head bolts from
the top hinge with a 3/8” wrench or socket.
• Lift the door upwards and pull up and away
from the cabinet until free of the bottom hinge
pin mounted on the front of the cabinet.
• To replace the door, reverse the above
procedures and securely tighten all screws
to prevent hinge slippage.
CAUTION
Doors are heavy. Two people are
recommended to remove or replace the door
assembly from the cabinet.
1. Place the basket on a rm, at surface.
2. With the narrow side of the handle clip on
the inside of the basket, snap the handle
clip to the recessed area in the basket.
To install the handle clips to the basket:
3. Once the inside surface snaps in place,
continue the process by rolling the handle
clip slightly outward and pressing down
rmly to snap onto the outside surface. If
installed incorrectly, the handle clip will not
lay at.
INSTALLATION
Hinge Cover
Hinge Bolts (2)
Hinge Plate