Filter
Top Products
20
SETTING OVEN CONTROLS
NOTE
The temperature display mode option cannot be changed
when the oven is active with any cooking function or
during self-clean.
To switch between audible or silent keypad
operation modes:
Step Press
1. Press and hold
delay start for 6 seconds.
2. Press self-clean
to toggle between "bEEP On" (Fig. 1)
or "bEEP OFF" (Fig. 2).
Release keypad when the mode you
prefer is displayed.
3. Press start to accept.
Setting for audible or silent keypad
operation
Normally a beep will sound each time a keypad is pressed.
If desired, the control may be set for silent keypad
operation.
Fig. 1
Fig. 2
If the control is set for silent keypad operation the timer,
preheat and any end of cycle or error tone alerts will
remain audible.
NOTE
Fig. 3
Setting lock
The control may be programmed to lock the oven door and
lock the oven control keypad operations.
To activate the lock feature:
Step Press
Press and hold lock keypad for 3 seconds.
"door Loc" will appear in the display until
the oven door is completely locked (Fig. 3).
NOTES
• To avoid possible damage to the oven door latching
mechanism, do not attempt to force open the oven door
whenever the door Loc message is displayed.
• If a control keypad is pressed when the lock feature is
active, the oven control may produce an error tone
(triple beep) indicating the keypad action requested is
not available when lock is active.
Press and hold lock keypad for 3 seconds.
Once the oven door has unlocked the
"door Loc" message will turn off.
To cancel the lock feature:
Step Press
Changing oven temperature display mode
The oven control is preset to display the oven temperature
with Fahrenheit values. The control may be changed to
display either Fahrenheit or Celsius temperatures.
To change the temperature display mode:
Step Press
1. Press and hold broil for
6 seconds.
2. Press self-clean to toggle
between Fahrenheit or Celsius
temperature display modes and
release keypad when the mode
you prefer is displayed.
3. Press start to accept.