Filter
Top Products
4-4
Place the filter screen in the bottom of the
filter pan.
4. Lay a sheet of filter paper over the
screen, overlapping on all sides, or, if
using a filter pad, lay the pad over the
screen.
5. Install the hold-down ring over the paper
or the pad.
Lay a sheet of filter paper or a filter pad over the
screen. If using the PAD, ensure the rough side of
the pad is up.
If using filter paper, position the hold-down ring
over the filter paper and lower the ring into the
pan, allowing the paper to fold up around the
ring as it is pushed to the bottom of the pan.
When the hold-down ring is in position, sprinkle
one cup of filter powder evenly over the paper.
If using a filter pad
, position the hold-down ring
on top of the pad. DO NOT use filter powder with
the pad.
6. Replace the crumb screen in the filter pan, then push the filter pan back into the fryer,
positioning it all the way to the back of the cabinet.