Frymaster 35 Fryer User Manual


 
1-5
45 Model Family (continued from previous page)
Model
Built-In
Filtration
Controls
(Note: Millivolt controls require no external power.)
PMJ*45EC
No Electric. CM III Computer.
PMJ*45EBL
No
Electric. Thermostat knob on control panel with push-button basket lift control
and ON/OFF switch or Basket Lift Timer.
PMJ*45EBLC
No Electric. CM III Computer.
PMJ*45EBLM
No
Electric. Thermostat knob on control panel with push-button basket lift control
plus ON/OFF and melt cycle switches.
PMJ*45EM
No
Electric. Thermostat knob on control panel with ON/OFF and melt cycle
switches.
FMP*45 or
FPP*45
Yes
Millivolt. Thermostat knob on control panel. (Requires external power supply
for filter.)
FMP*45E or
FPP*45E
Yes
Electric. Thermostat knob on control panel with ON/OFF switch or Solid State
Controller or Digital Controller.
FMP*45EC or
FPP*45EC
Yes Electric. CM III Computer.
FMP*45EBL or
FPP*45EBL
Yes
Electric. Thermostat knob on control panel with push-button basket lift control
and ON/OFF switch or Basket Lift Timer.
FMP*45EBLC or
FPP*45EBLC
Yes Electric. CM III Computer.
FMP*45EBLM or
FPP*45EBLM
Yes
Electric. Thermostat knob on control panel with push-button basket lift control
plus ON/OFF and melt cycle switches.
FMP*45EM or
FPP*45EM
Yes
Electric. Thermostat knob on control panel with ON/OFF and melt cycle
switches.
* Insert the number of fryers in the battery (e.g., a PMJ145 has one fryer, a PMJ245 or an FPP245 has two
fryers; an FMP145 has one fryer and one holding station, an FMP245 has two fryers and one holding station.
There is no FPP145).
† Available with pilot ignition only.
1.6 Installation, Operating, and Service Personnel
Operating information for Frymaster equipment has been prepared for use by qualified and/or
authorized personnel only, as defined in Section 1.7. All installation and service on Frymaster
equipment must be performed by qualified, certified, licensed, and/or authorized installation
or service personnel, as defined in Section 1.7.
1.7 Definitions
QUALIFIED AND/OR AUTHORIZED OPERATING PERSONNEL
Qualified/authorized operating personnel are those who have carefully read the information in this
manual and have familiarized themselves with the equipment functions, or who have had previous
experience with the operation of the equipment covered in this manual.
QUALIFIED INSTALLATION PERSONNEL
Qualified installation personnel are individuals, firms, corporations, and/or companies which, either
in person or through a representative, are engaged in and are responsible for the installation of gas-
fired appliances. Qualified personnel must be experienced in such work, be familiar with all gas