Filter
Top Products
PREFACE
Thank you for purchasing the DSR-FR cable small cable for DSU3 (MB2198-201, referred to as
"small cable") for the DSU-FR emulator.
The DSR-FR cable small cable for DSU3 is used to connect the DSU-FR emulator (MB2198-01, re-
ferred to as "emulator") and the DSU-FR cable (MB2198-10) to a user system.That uses Fujitsu FR
family micro controller (DSU3 Interface loading) to a user system.
This manual explains the handling of the DSR-FR cable small cable for DSU3 for the DSU-FR em-
ulator.
Before using the MB2198-201, be sure to read this manual.
Consult the Sales Department or the Support Department of Fujitsu Limited for mass-produced
MCUs and evaluation MCUs.
■ Handling and use
The handling and use of this product and notes regarding safety are included in the hardware manual
of the DSU-FR emulator and DSR-FR cable operation manual.
Follow the instructions in "DSR-FR EMULATOR MB2198-01 HARDWARE MANUAL"and
"DSR-FR EMULATOR DSR-FR CABLE MB2198-10 OPERATION MANUAL"for the use of this
product.
■ Caution of the products described in this document
The following precautions apply to the product described in this manual.
CAUTION
The wrong use of a device will give an injury and may cause malfunction
on customers system.
Cuts
This product has parts with sharp points that are exposed.
Do not touch edge of the product with your bare hands.
Damage
Please unite correctly the camfering portion of an emulator interface connector, and
the camfering portion of a user system connector.If it mistakes, there is a possibility
of becoming the cause of failure of an emulator system and a user system.
i