Filter
Top Products
11
Cleaning the extractor hood
Clean the extractor hood and the aluminium-
design ventilation ducts (LK 530-011/021) with a
soft cloth and mild detergent solution only.
Clean the stainless-steel design ventilation
ducts (LK 530-010/020) with mild detergent
solution and apply stainless steel care agent to the
metal surface using a soft cloth.
Cleaning the glass plates
Apply commercially available window cleaning
agent with a soft, moist cloth. To facilitate cleaning,
you can detach the glass plates as follows:
Detach the grease filters. Inside the extractor hood,
you will find three openings on the upper side
through which you can lift the glass plates singly
with a blunt object (e.g. handle of a wooden spoon)
to detach them with greater ease.
If they are extremely soiled, the glass plates can be
cleaned in a dishwasher at a maximum temperature
of 130 °F / 55 °C.
Note: When putting the glass trays back in place,
make sure that you do not scratch the chimney.
Cleaning the aluminium panel
Clean the aluminium panel with a sponge and mild
detergent solution only. Wipe with a soft, dry cloth.
Do not use any strong or caustic cleaning agents or
brushes and abrasive cleaner to clean it. Do not use
strongly alkaline cleaning agents (such as oven
spray) because these are aggressive to the
aluminium surface. Do not use any abrasive
sponges either.
Fig. 15