Filter
Top Products
Air recirculation
If, when purchasing the extractor hood, you have
decided in favour of the air recirculation mode,
the activated charcoal filter KF 600-090 must be
replaced after a certain amount of hood operation.
Note: The activated charcoal filter is not included
in the scope of delivery of the hood.
Activated charcoal filters do not contain any
polluting substances. Old activated charcoal filters
can be disposed of as domestic waste. If used once
daily, the activated charcoal filter must be replaced
approximately once to twice every year. First
remove the grease filter. Press out the two tabs in
the downward direction and remove the activated
charcoal filter from the hood in the downward
direction (see Fig. 14). Replace the old activated
charcoal filter by the new one. Install in the reverse
order.
Cleaning the extractor hood
Clean the stainless steel parts of the extractor
hood with mild rinsing detergent and apply
stainless steel care agent to the metal surfaces
using a soft cloth.
Clean the two glass plates in a dishwasher.
Do not use any strong or caustic cleaning agents or
brushes and abrasive cleaner.
Do not use any abrasive sponges either. Use
commercially available window cleaner and apply
it to a soft, moist cloth.
Only clean the switch panel with a soft cloth. Do
not use any cleaning agent as it might be agressive
to the inscription markings.
10
Fig. 14