Filter
Top Products
16
Before You Begin
Tools and Parts Needed
▯ Measuring tape
▯ Pencil
▯ Phillips screwdriver (Posidrive) #2
▯ Drill with the following bits: 5/16" (8 mm)
▯ Spirit-level
▯ Aluminum tape (DO NOT use insulating tape)
▯ Exhaust channel (configuration depends on the
installation situation)
▯ Additional sheet metal screws (if necessary for
installation of the exhaust air duct)
▯ Saw
Parts Included
Appliance dimensions
▯ This appliance is installed on the wall.
▯ Follow the enclosed installation instructions for
additional special accessories (e.g. for
circulating-air mode).
▯ The surfaces of the appliance are sensitive. Avoid
damaging them during installation.
[
[
[
[
[
[
[
[
[
PLQ
!
!
PLQ
PD[
PP
PLQ
DERYHHOHFWULF
VXUpOHFWULTXH
VREUHHOpFWULFR
DERYHJDV
VXUJD]
VREUHJDV