Filter
Top Products
Draining the cooking liquid from the cooking
basin:
Proceed as follows:
– If you do not have a permanently fitted water
connection, place a vessel (e.g. a 10 l bucket)
under the drain valve of the additionally installed
drain installation set AG 060-000.
– Turn the “Temperature" control knob to the left
to the (Drain valve) position.
– Turn the “Short time" control knob to the left
to the position and hold the knob in this
position (Fig. 14).
– An audible signal is sounded. The symbol
(Drain valve) flashes on the display after a few
seconds. The drain valve is opened.
– The (Drain valve) symbol lights up
permanently in the display when the drain valve
is open.
Closing the drain valve:
– Turn the “Temperature" control knob to the left
to the (Drain valve) position.
– Turn the “Short time" control knob to the right to
the + position and hold the knob in this position
(Fig. 15).
– An audible signal is sounded. The symbol
(Drain valve) flashes on the display after a few
seconds. The drain valve is closed.
– The symbol (Drain valve) goes off as soon as
the drain valve has been closed.
Note: The (Drain valve) symbol flashes on the
display if the drain valve is not completely open or
closed.
If you do not have a permanently installed
drainage connection, place a temperature-resistant
receptacle of a corresponding size (at least 10 l)
under the drain valve and install the drain
installation set AG 060-000.
10
Note:
Allow the water or the cooking liquid to cool down
before draining it: This avoids steaming in the
base cabinet and scalding. Pay attention to
regular descaling if the water is highly limey.
Otherwise, discoloration and heat build-ups may
be the result.
Fig. 14
Fig. 15