Filter
Top Products
1110
Example:
In addition to time-based watering, it is also possible to include
the soil moisture or rain sensor in the watering programs.
If the soil is moist enough, the program will be stopped, or a
program will be prevented from starting. Manual operation via
man. On/Off is unaffected by this.
1. Place soil moisture sensor in the watered area
– or –
place rain sensor (with extension cable if necessary)
outside the watered area.
2. Insert the sensor in the sensor connection
N
of the Water
Computer.
Connect soil moisture
or rain sensor (optional):
Program Starting time Watering time Watering days / Watering cycles
PROG START TIME RUN TIME Mo Tu We Th Fr Sa So 2
nd
3
rd
1 7: 30 0:30 X X X
2 19:00 0:20 X X
3 22 :30 1:10 X X X
4 4:00 0:15 X
5 ––
6 ––
To secure your Water Computer against theft, you can obtain
the GARDENA anti-theft device art. no. 1815-00.791.00 from
GARDENA Service.
1. Screw clamp
O
with screw
P
firmly to the back of the Water
Computer.
2. Use clamp e.g. for fixing a chain.
It is no longer possible to remove the screw after it has been
screwed in.
5. Programming
The control unit
I
can be removed from the housing for pro-
gramming by pressing the unlock button
H
and programming
can be undertaken whilst you are moving around (see 4.
Putting Your Water Computer into Operation
“Insert battery”
).
1. Press Menu-key (not necessary if the battery has just been
inserted).
The hours display and
ttiimmee
flash.
Fit anti-theft device
(optional):
Set current time
and day of week:
1.
N
P
O
GB
GB