Filter
Top Products
QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
POSSIBLE CAUSE
OVEN
WL
NOT
‘*
A fuse in your home may be blown or the circuit breaker
tripped.
Replace fuse or
COME ON
reset circuit breaker.
I
●
Unplug your microwave oven, then plug it back in.
I
●
Makesure3-prong plugonovenisfully insertedinto
wdlreceptacle.
,
I
CONTROL PANEL
Q
Door not securely closed.
LIGHTED,
~T
OVEN
●
START pad must be touched after entering cooking
sel~tion.
~L
NOT START
●
Another selection entered
aheady
in
oven and
CLEAWO~
pad
not
touched to
cancel it.
●
Make sure you have entered cooking time after touching
TM
COOK I &
D
pad.
I
c
CLEAWOFF
pad was touched
accidentrdly.
Reset cooking program and touch
START pad.
FLOOR OF THE OVEN
●
The
cooktop
lamp is located
direcfly
below the oven floor. When the lamp
IS WARM, EVEN
is on, the heat it produces makes the oven floor get warm. This is normal.
W~N
THE OVEN
HAS NOT BEEN USED
Au
these things are
normal
with your microwave oven:
●
Steam or vapor escaping from around the door.
●
Dull thumping sound while oven is operating.
●
Light reflection around door or outer case.
●
Some TV-Radio interference might be noticed
●
Dimming oven light and change in blower sound
while using your microwave oven. It’s similar to
may occur while operating at power levels other
the interference caused by other small appliances
than high.
and does not indicate a problem with your oven.
If you need more
help...cdl,
toll free: GE Answer Center@/ 800.626.2000/ consumer information service
26