GE 200D8074P043 Refrigerator User Manual


 
DIMENSIONS AND SPECIFICATIONS
(for 23‘ CustomStyle
models)
DIMENSIONS AND SPECIFICATIONS
28
Installation Instructions
INSTALLING THE REFRIGERATOR
REFRIGERATOR LOCATION
Do not install the refrigerator where the
temperature will go below 60°F (16°C)
because it will not run often enough to
maintain proper temperatures.
Do not install the refrigerator where the
temperature will go above 100°F (37°C)
because it will not perform properly.
Install it on a floor strong enough to
support it fully loaded.
CLEARANCES
Allow the following clearances for ease
of installation, proper air circulation and
plumbing and electrical connections:
23‘ (33” wide),
23‘/25‘ CustomStyle
25‘, 26‘, 27‘, 29‘
Sides 1/8(4 mm) 1/8(4 mm)
Top 1(25 mm) 1(25 mm)
Back 1/2(13 mm) 1(25 mm)
70
1
4(178.4 cm)
36
(91.4 cm)
24(61 cm)
24(61 cm)
Cabinet
Water
Electrical
3/4(19 mm) Airspace
(1/2[13 mm] Gap +
1/4[6 mm] Wall Plates)
25(63.5 cm)
Countertop
DIMENSIONS AND SPECIFICATIONS
(for 25‘ CustomStyle
models)
*72
1
/4(183.5 cm) required for full adjustment
of mobility wheels. If cabinets installed
above refrigerator have doors that are
flush to the top of the opening for the
refrigerator, then an additional 1/8may be
required to provide clearance for cabinet
doors to open freely.
36
(91.4 cm)
24(61 cm)
72
1
4(183.5 cm)*