Filter
Top Products
7
Empty the pan. Place the Chill/Thaw tray
in the pan. Place the items on the tray and
close the pan completely.
Select the ExpressThaw,
™
ExpressChill
™
or
SelectTemp
™
pad. The display and SET
light will come on. Tap the pad until the
light appears next to the desired setting. Use
the chart to determine the best setting to
use.
To stop a feature before it is
finished, tap that feature’s pad
until no options are selected and
the display is off.
During ExpressThaw and ExpressChill,
the display on the controls will count
down the time
in the cycle.
After the ExpressThaw cycle is
complete, the pan will reset to the MEAT
setting (32°F) to help preserve thawed
items until they are used.
The displayed actual temperature of the
CustomCool pan may vary slightly from
the SET temperature based on usage and
operating environment.
NOTE: For food safety reasons, it is recommended
that foods be wrapped in plastic wrap when using
ExpressThaw. This will help contain meat juices
and improve thawing performance.
About CustomCool
™
. GEAppliances.com
The CustomCool
™
feature is a system of
dampers, a fan, a temperature thermistor and a
heater. Depending on the function selected, a
combination of these will be used to quickly
chill items, thaw items or hold the pan at a
specific temperature.
The pan is tightly sealed to prevent the pan’s
temperature from causing temperature
fluctuations in the rest of the refrigerator.
Some CustomCool models feature a beverage
center. It is designed to store beverages at colder
temperatures. Select the Beverage Center pad if
you like to keep extra-chilled refreshments on
hand.
The controls for this pan are located at the top
of the refrigerator with the temperature
controls.
How to Use
How it Works
ExpressThaw
™
To remove:
Pull the drawer out to the stop position.
Rotate all four swing locks to the unlock
position.
Lift the front of the drawer up and out.
To replace:
Make sure all four swing locks are in the
unlock position.
Place the sides of the drawer into the
drawer supports, making sure the swing
locks fit on the drawer slots.
Lock all four swing locks by rotating them
to the lock position.
How to Remove and Replace the Drawer
ExpressChill
™
Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions