Filter
Top Products
Consumer Support Troubleshooting Tips Operating Instructions Safety Instructions
Installation
Instructions
16
Trim kits and decorator panels.
Dimensions for Custom Wood Panels
3/4 (19 mm) or Raised Panel
A raised panel design screwed or glued to a 1/4 (6 mm) thick backing, or a 3/4 (19 mm) routed board can be
used. The raised portion of the panel must be fabricated to permit clearances of at least 2 (5.1 cm) from the
handle side for fingertip clearance.
Panels thicker than 1/4 (6 mm), up to 3/4 (19 mm) max., will require that the outer 5/16 (8 mm) of panel
perimeter be no thicker than 1/4 (6 mm).
Weight limitations for custom panels:
Fresh Food 10 lbs. (4.5 kg) max. for each door
Freezer Door 18 lbs. (8 kg) max.
2(5.1 cm)
Clearance
Handle Side
Appearance
Panel
Refrigerator
Door
1/4(6 mm)
Thick Backing
3/4
(19 mm)
Panels thicker than 1/4(6 mm)
1/4(6 mm) max
3/4(19 mm)
5/16 (8 mm)
Right Fresh Food Door
Freezer Door
Top, right and
bottom
16 29/32(42.9 cm)
5/16(8 mm)
minimum at
1/4(6 mm)
thickness
Raised portion
of panel
2(51 mm)
minimum at
1/4(6 mm)
thickness
Handle side
26 3/32
(66.3 cm)
2(51 mm) minimum at
1/4(6 mm) thickness
Handle side
Left, right and
bottom sides
5/16(8 mm) minimum
at 1/4(6 mm) thickness
35 29/32(91.2 cm)
Raised
portion
of panel
38 15/16
(98.9 cm)
Left Fresh Food Door
Top, left and
bottom
16 29/32(42.9 cm)
5/16(8 mm)
minimum at
1/4(6 mm)
thickness
Raised portion
of panel
2(51 mm)
minimum at
1/4(6 mm)
thickness
Handle side
38 15/16
(98.9 cm)
1/8
(3 mm)
1/8
(3 mm)
1/8
(3 mm)
1/8
(3 mm)
1/8
(3 mm)
1/4
(6 mm)
1/4
(6 mm)
1/4
(6 mm)
1/4
(6 mm)
1/4
(6 mm)
1/8
(3 mm)
1/4
(6 mm)