Filter
Top Products
Non-Adjustable Bins on the Door
To remove: Lift the bin straight up, then
pull out.
To replace: Engage the bin in the molded
supports on the door and push down.
It will lock in place.
Adjustable Bins on the Door
Adjustable bins can easily be carried from
refrigerator to work area.
To remove: Lift bin straight up, then
pull out.
To replace or relocate: Slide in the bin just
above the molded door supports, and push
down. The bin will lock in place.
The snugger helps prevent tipping, spilling
or sliding of small items stored on the door
shelf. Grip the finger hold near the rear of the
snugger and move it to fit your needs.
About the additional features.
Not all features are on all models.
Non-Adjustable Beverage Rack
To remove: Lift the rack straight up, then
pull out.
To replace: Engage the rack in the molded
supports on the door and push down. It will
lock in place.
About the shelves and bins.
Consumer Support Troubleshooting Tips Operating Instructions Safety Instructions
Installation
Instructions
8
Adjustable Divider in Freezer Basket
The freezer basket has a divider that can be
both repositioned or removed.
To remove: Pull the divider forward until the
rear locating tabs are out of the slots. Turn
the divider slightly to the side to release the
front locating tabs and lift out.
To replace: Turn the divider slightly to one
side so the tabs on the front fit into the vent
slots on the basket. Position the divider so
the back locating tabs snap into place in the
back vent slots.
To reposition: Remove the divider. Slide the
divider left or right to the desired location and
replace as instructed above.
Optional Freezer Caddy
The optional freezer caddy fits over the front
edge of the bottom freezer basket and can
be removed or added as needed.
To remove: Lift the freezer caddy up.
To replace: Lower the freezer Caddy ensuring
the hook fits over the front edge of the
bottom freezer basket. Push down to secure.
Tabs
Caddy