Filter
Top Products
Using the clock and timer.
(on self-clean models only)
Not all features are on all models.
Operating Instructions
Safety Instructions
Care and Cleaning
Installation InstructionsTroubleshooting Tips
14
To Set the Clock
The clock must be set for the automatic
oven timing functions to work properly.
The time of day cannot be changed during
a timed baking or self-cleaning cycle.
Press the
CLOCK
pad.
Press the
HOUR
and
MIN.
pads.
Make sure the clock is set to the
correct time of day.
To Set the Timer
Press the
TIMER ON/OFF
pad. Press the
HOUR
and
MIN.
pads until the
amount of time you want shows in the
display. The timer will start
automatically within a few seconds of
releasing the pad.
The timer is a minute timer only.
The timer does not control oven
operations. The maximum setting on
the timer is 11 hours and 59
minutes.
End of Cycle Tones
Clear the tones by pressing the pad of the
function you are using.
or
To Reset the Timer
If the display is still showing the time
remaining, you may change it by pressing
the
HOUR
and
MIN.
pads until the time you
want appears in the display.
If the remaining time is not in the display,
recall the remaining time by pressing the
TIMER ON/OFF
pad and then pressing the
HOUR
and
MIN.
pads until the new time you
want shows in the display.
To Cancel the Timer
Press the
TIMER ON/OFF
pad once. To
cancel the timer press the
TIMER ON/OFF
pad again.