GE FUF12 Freezer User Manual


 
11
ge.com
Consumer SupportTroubleshooting Tips
Operating Instructions
Safety Instructions
Installation
Instructions
To Remove the Freezer Door (on Non-Electronic Control Upright models)
Remove the plastic hinge cover by either
lifting it off or folding it back (depending
on model).
Remove the screws holding the hinge
to the top of the cabinet using a
screwdriver, 5/16 socket driver or wrench
(depending on model).
Remove the top hinge from the cabinet
and lift the door up and off the lower
hinge pin. Set the door aside.
Remove the two screws from the bottom
hinge.
To replace the doors, reverse the order of the
above instructions.
CAUTION: It is very important that all hinge
screws are securely tightened to ensure a
secure assembly and prevent hinge slippage.
4
3
2
1
(on some models)
Hinge
Screws
Top Hinge
Plastic Hinge
Cover
Lid Removal (on Chest models)
See lid removal instructions on either the
back of the cabinet or the hinge label.
To Remove the Freezer Door (on Electronic Control Upright models)
The hinge screws are tamperproof.
Please have an authorized service
technician remove the door.