Filter
Top Products
Operating Instructions
Safety Instructions
Consumer Support
Troubleshooting Tips
7
Using the clock and timer. GEAppliances.com
Not all features are on all models.
To Set the Timer
The timer does not control oven operations.
The maximum setting on the timer is 9 hours
and 59 minutes.
Touch the TIMER/CLOCK pad.
Touch the + or – pad until the amount
of time you want shows in the display.
The maximum time that can be
entered in minutes is 59. Times more
than 59 minutes should be changed
to hours and minutes.
If you make a mistake, touch the TIMER/CLOCK
pad and begin again.
Touch the START pad. The time
will start counting down, although
the display does not change until
one minute has passed.
When the timer reaches :00, the
control will beep 3 times followed by
one beep every 6 seconds until the
TIMER/CLOCK pad is touched.
The timer is a minute timer only.
The CLEAR/OFF pad does not affect
the timer.
To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of
day cannot be changed during a delayed
cooking or a delayed self-cleaning cycle.
Touch the TIMER/CLOCK pad twice.
Touch the + or – pad.
If the + or – pad is not touched
within one minute after you touch the
TIMER/CLOCK pad, the display reverts to
the original setting. If this happens, touch
the TIMER/CLOCK pad twice and reenter
the time of day.
Touch the START pad until the time
of day shows in the display. This enters
the time and starts the clock.
To check the time of day when the display is
showing other information, simply touch the
CLOCK pad. The time of day shows until another
pad is touched.
Make sure the clock is set to the
correct time of day.
To Turn Off the Clock Display
If you have several clocks in your kitchen,
you may wish to turn off the time of day
clock display on your oven.
Touch the TIMER/CLOCK pad once
to turn off the time of day display.
Although you will not be able to see it,
the clock maintains the correct time
of day.
Touch the TIMER/CLOCK pad twice to
recall the clock display.
To Reset the Timer
If the display is still showing the time
remaining, you may change it by touching
the TIMER/CLOCK pad, then touching the +
or – pad until the time you want appears in
the display.
If the remaining time is not in the display
(clock, start time or cooking time are in the
display), recall the remaining time by
touching the TIMER/CLOCK pad and then
touching the + or – pad to enter the new
time you want.
To Cancel the Timer
Touch the TIMER/CLOCK pad twice.