Filter
Top Products
Fahrenheit or Centigrade Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change this
to use the Centigrade selections.
Touch the BAKE and BROIL HI/LO pads
at the same time for 2 seconds until
the display shows SF.
Touch the BROIL HI/LO and COOKING
TIME pads at the same time for 2
seconds. The display will show F
(Fahrenheit).
Touch the BROIL HI/LO and COOKING
TIME pads again at the same time for
2 seconds. The display will show C
(Centigrade).
Touch the START pad.
Changing the Speed of the +/– Pads
As you use the +/– pads when setting a time or
temperature, you may notice the display changes
slowly. This special feature allows you to change the
speed.
To set the speed you prefer, follow the
steps below:
Touch the BAKE and BROIL HI/LO pads
at the same time for 2 seconds until
the display shows SF.
Touch the + pad. The display will
show you a set speed between 1 and 5.
Touch the + pad to increase the speed
up to the number 5.
Touch the – pad to decrease the
speed down to the number 1.
Touch the START pad to activate the
setting and leave the control set in this
special features mode.
9
Operating Instructions
Safety Instructions
Consumer Support
Troubleshooting Tips
12-Hour, 24-Hour or Clock Black-Out
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black-out the clock
display, follow the steps below:
Touch the BAKE and BROIL HI/LO
pads at the same time for 2 seconds
until the display shows SF.
Touch the TIMER/CLOCK pad once.
The display will show 12 hr.
Touch the TIMER/CLOCK pad again to
change to the 24-hour military time
clock. The display will show 24 hr.
Touch the TIMER/CLOCK pad again to
black-out the clock display. The display
will show OFF.
Touch the START pad to activate your
choice and leave the control set in this
special features mode.
NOTE: If the clock is in the black-out mode you will
not be able to use the Delay Start function.
GEAppliances.com
Control Lockout
Your control will allow you to lock out the touch
pads so they cannot be activated when touched.
To lock the controls:
Touch the BAKE and BROIL HI/LO pads
at the same time for 2 seconds until
the display shows SF.
Touch the SELF CLEAN pad. The
display will show LOC OFF.
Touch the SELF CLEAN pad again.
The display will show LOC.
Touch the START pad to activate the
control lockout feature and leave
the control set in this special
features mode.
When this feature is on and the touch
pads are touched the control will beep
and the display will show LOC.
NOTE: The control lockout mode will not affect the
clock, timer and oven light touch pads.