Filter
Top Products
M
Millenium™ RO System by GE Osmonics
14693e – 31 Mar 03 1 - 14 General Information
1.12 Electromagnetic Interference
This equipment can generate, uses and can radiate radio frequency energy and, if not
installed and used in accordance with these instructions, may cause harmful interference
to other devices in the vicinity. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference with
other devices, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving device
• Increase the separation between the equipment
• Connect the equipment into an outlet on a circuit different from that to
which the other device(s) is connected
• Consult the field service technician or manufacturer for help.
1.13 Service Assistance
If service assistance is required, please take the following steps:
Consult the “Troubleshooting” section of this manual (Chapter Five). If the problem
cannot be identified and corrected by any of the procedures found in that section, then...
Contact your Facility Equipment Technician. If the technician is unable to help then…
Call GE Osmonics Technical Service Department at (800) 633-3080 or (206) 395-2200.
Technicians are available for all calls between 7:00 a.m. and 4:30 p.m. PST, Monday
through Friday. Technicians are also available at other times for emergency calls only.
Product consultants will be on hand to discuss the problem with you and endeavor to
rectify it over the phone. If the problem appears to be of a more serious nature, you will
be given instructions regarding the action to be taken. Prior to making the phone call,
you must be prepared to answer two questions:
1. What RO do you have, i.e. Millenium™
2. What is the serial number of your RO? (Label, found on back of RO.)
RO SERIAL NUMBER: ______________________