Filter
Top Products
How to Use the Minute/Second
~mer
The MIN/SEC TIMER has three
timing functions:
. It operates as a minute timer.
● It can be set to delay cooking.
● It can be used as a hold setting
after defrosting.
The MIN/SEC TIMER operates
without microwave energy.
How to Time a 3-Minute
Phone Call
1. Touch MIN/SEC TIMER pad.
The display shows “: O“ and
“ENTER TIME” flashes.
2. Touch number pads 3,0 and O
(for 3 minutes and no seconds).
Display shows
“3:00”
and “TIME.”
3. Touch START. Display shows
time counting down.
4. When time is up, oven signals,
flashes “End,” and display shows
time of day.
Programming a Holding
Time
The Minute/Second Timer can also
be used to program a holding time
between microwave cooking functions.
The time can range from one second
to 99 minutes and 99 seconds. A
holding or standing time maybe
requested in some of your own
recipes or cookbook.
Programming Delayed
Cooking
To delay cooking up to 99 minutes
and 99 seconds, touch TIME COOK I
or TEMP COOK/HOLD and enter
cook time or temp. Touch MIN/SEC
TIMER and enter number of minutes
to delay cooking. Touch START.
Timer will count down to
zero and
cooking will begin. When delaying
temperature cooking, be sure that
probe is in food before pressing
START.
How to Time Defrost, Hold
and Time Cook
Let’s say you want to defrost a
fro~n
casserole for 15 minutes, hold
for
10
minutes and then
Time Cook for
25 minutes. Here’s how to do it:
Step 1:
Take casserole from freezer
and place in oven.
Step
2: Touch TIME DEFROST pad.
The display shows “: O“ and
“POWER 3.” “ENTER DEF
TIME” flashes.
Step
3: Touch pads 1, 5,0 and O for
15 minutes defrosting time.
“15:00”
appears on display. (Defrosting is
automatically set on power level 3
but can be changed by touching
the POWER LEVEL pad and the
desired power level.)
Step
4: Set holding or standing
time by touching MIN/SEC TIMER.
The display shows “: O“ and
“ENTER TIME” flashes.
Step
5: Touch 1,0,0 and O to hold
for ten minutes.
“10:00”
appears on
display and “TIME” flashes.
Step 6: Touch TIME COOK
I
pad.
The display shows “: O“ and
“POWER 10.” “ENTER COOK
TIME 1“ flashes.
Step 7: Touch 2,5,0 and O for
twenty-five minutes of cooking time.
“COOK TIME 1“ flashes,
“25:00”
and “POWER 10” appear on display.
Step8:
Touch START.
“DEFTIME”
and “15
:00”
counting down show on
display. As each function is
automatically performed, oven
display shows instructions entered
and the function.
Step
9: When time is up, the
oven signals, flashes “End” and
shuts off.
Questions and Answers
Q. What will happen if I
accidentally reverse my defrost,
hold and cook instructions?
A.
The oven will automatically
rearrange your program. Defrosting
will always come first, then hold,
and then the cooking function.
Q.
Can I defrost and hold only?
A. Yes.
Sometimes you may only
want to defrost a food, hold it, and
cook it later.
All
you need to do is
program in Time Defrost and
amount of time. Then program a
holding time (example in steps 4
and 5 at
left).
Be sure to put the
thawed dish in the refrigerator
promptly.
NOTE: Let foods remain at room
temperature only as long as safe.
Times will vary.
Q. I programmed my oven for
a specific defrosting time but it
defrosted longer than necessary.
What happened?
A. When instructions conflict,
the oven carries out the last
instruction. You may have set the
oven to Defrost for 4 minutes,
Hold/Time for 2 minutes, and then
Defrost for 6 minutes. In this case, the
oven would Defrost for 6 minutes
and Hold/Time for 2 minutes.
11
!
.
1
.
i
m
~
i
I