Filter
Top Products
I
PROBLEM
POSSIBLE CAUSE AND REMEDY
“PROBE” APPEARS
ON DISPLAY
I
●
probe
has
been forgotten or not seated properly in oven wall when using
Temp
Cook/Hold or Auto Roast functions.
“RESET” APPEARS
. Power has been disrupted. Touch CLEAR/OFF and reset clock.
ON DISPLAY
Ml
these
things are normal with your microwave oven:
*
Steam or vapor escaping from
●
Dull,
thumping sound while oven
●
Some TV-Radio interference
around the door.
is operating. might be noticed while using your
●
Light reflection around door or
Q
Dimmin
g
oven
fight
and change
microwave oven. It’s similar to the
outer case.
in blower sound may occur
while
interference caused by other small
operating at
power
levels
other
appliances and does not indicate a
than
high.
problem with your oven.
If you need more help.. call, toll free:
The GE Answer Center”
800.626.2000
consumer information service
21