Filter
Top Products
.
b
BEFORE YOU BEGIN
!
Read these instructions completely and
carefully.
IMPORT~: Save these instructions for the
10A electrical inspector’s use.
IMPORT~: OBSERVE ALL GOVERNING
CODES AND ORDINANCES.
NOTE TO INSTALLER Leave these
instructions with the appliance after installation
is completed.
NOTE TO CONSUMER Keep this Use and
Care Guide and Installation Instructions for
fiture use.
NUIE
‘Ihis appliance must be properlygrounded.
TOOLS YOU WILL NEED
Large blade screwdriver
Channel lock pliers
ELECTRKAL REQUIREMENTS
CAUTION, FOR PERSONAL ~
DO NOT USE AN EXTENSION CORD WITH
THIS APPLIANCE.
REMOVEHOUSE FUSE OR OPEN CIRCUIT
BREAKER BEFORE BEGINNING
INST~TION.
This appliancemust be suppliedwiththe proper
voltageand h-equency,and connected to an
individual,properlygrounded branch circuit
protected by a circuit breaker or time delayfuse, as
noted on the rating plate.
Wtig must conformto NationalElectric Codes.
Ifthe electric service provided does not meet the
above specifications,it is recommended that a
licensed electricianinstallan approvedoutlet
Because range terminals are not accessibleafter
range is in position,flexibleservice conduit or cord
must be used.
STEP 1
PREMRE THE
OPENING
lfil’ spacing is
recommended horn the range to
adjacent vertical walls above cooktop surface.
Allow
30”minimum clearance between surface
units and bottom of unprotected wood or metal
top cabinet and 1511minimum between
countertop and adjacent cabinet bottom.
STEP 1 (cont.)
To eliminate the risk of burns or fire by reaching
over heated surface units, cabinet storage space
above the surface units should be avoided. If
cabinet storage is to be provided, the risk can be
reduced by installing a range hood that projects
horizontally a min. of 5“ beyond the bottom of the
cabinets.
NOT LESS THAN
WIDTH OF RANGE
I
1=
I
/
~/
.
30”
#
i
LOCATE OUTLET
,
SHADED AREA
MIN.
OUTLET BOX
INSTALLED
I
:
,.
25