Filter
Top Products
FEATURES OF YOUR
OWN
CONTROL
A
CLEAR
OFF
T
TIMER
~-w~
●
BAKE
BROIL o
--
CUAN LOCK
N
,
6666
1. CLEAWOFF. Press this pad to cancel all oven
operations except clock and timer.
2.
3.
4.
5.
6.
7.
8.
9.
PROGRAM STATUS. Words light up in the
display to indicate what is in time display.
Programmed information can be displayed at any
time by touching the pad of the operation you
want to see. For example, you can display the
current time of day while the timer is counting
down by pressing the CLOCK pad.
TIME DISPLAY. Shows the time of day,
the times set for the timer or automatic
oven operation.
OVEN TEMPERATURE AND BROIL
DISPLAY. Shows the oven temperature or the
broil setting selected.
FUNCTION INDICATORS. Lights up to show
whether oven is in bake, broil or self-clean mode.
INCREASE. Short taps to this pad increase
time or temperature by small amounts. Press
and hold pad to increase time or temperature by
larger amounts.
DECREASE. Short taps to this pad decrease
time or temperature by small amounts. Press and
hold pad to decrease time or temperature by
larger amounts.
BAKE. Press this pad to select bake function.
BROIL. Press this pad to select broil function.
10. CLEAN. Press this pad to select self-cleaning
function. See Self-Cleaning Instructions.
11. COOK TIME. Press this pad for Time Bake
operations.
12. STOP TIME. Use this pad along with COOK
TIME or CLEAN pad to set the oven to start
automatically at a time you select.
13. CLOCK. To set clock, first press CLOCK pad.
Then press the INCREASE or DECREASE pad
to change the time of day. Press the CLOCK pad
to start.
14. TIMER. Press this pad to select timer function.
The timer does not control oven operations. The
timer can time up to
9 hours and 55 minutes.
To set timer, first press TIMER pad. Then press
the INCREASE or DECREASE pad to change
the time.
If “F-” and a number flash on display and the
control beeps, this indicates function error code.
If function error code appears during the self-cleaning
cycle, check oven door latch. The latch handle may
have been moved, even if only slightly, from the
latched position. Make sure the latch is moved to
the right as far as it will go. Press the
CLEAWOFF
pad. Allow oven to cool for one hour. Put oven
back into operation. If function error code repeats,
disconnect power to the range and call for service.
10