GE JGBP35GEP Range User Manual


 
OWN
CONTROL, CLOCK
Am
TMER
w
/
Clock
To Set the Clock
The clock must be set for the
automatic oven timing functions to
work properly. The time of day
cannot be changed during a Timed
Bake or CLEAN cycle.
n
1.
Press the
CLOCK pad.
CLOCK
A
1
INCREASE or
DECREASE pad
to set the time
of day.
3. Press the CLOCK pad
to start.
Timer
To Set the Timer
The timer is a minute timer; it does
not control oven operations. The
maximum setting on the timer is 9
hours and 55 minutes.
o
1. Press the pad.
TIMER
2. Press the INCREASE or
DECREASE pad to set the
amount of time on timer.
The timer will start automatically
within a few seconds of releasing
the pad.
The timer, as you are setting it,
will display seconds until 60
seconds is reached.
Then it will display minutes
and seconds until 60 minutes
is reached.
After 60 minutes, it will display
hours
(“HR”
now appears in
display) and minutes until the
maximum time of 9 hours and
55 minutes is reached.
To Reset Timer
To Cancel Timer Power Outage?
If “TIMER” is showing, press the
Press TIMER pad until the word After a power outage, when power
INCREASE or DECREASE pad
“TIMER” quits flashing on the is restored, the display will flash
until desired time is reached.
display (about 4 seconds). and time shown will no longer be
If “TIMER” is not showing, press
correct-for example, after a
the TIMER pad first, then follow
5-minute power interruption the
instructions above to set the timer.
clock will be 5 minutes slow.
The display flashes until the clock
is reset. All other functions that
were in operation when the power
went out will have to be
programmed again.
End of Cycle Tones
Display Messages
The end of cycle tone is a series of three beeps
If
“DOOr” appears on the display, the door latch
followed by one beep every six seconds. If you would
handle is not moved all the way to the right. Move the
like to remove the signal that beeps every six seconds,
latch handle and cleaning will start. If “LOCK”
press and hold the
CLEAWOFF pad for 10 seconds.
appears on the display, the oven door is in the locked
To return the signal that beeps every six seconds,
position.
BA~,
BROIL and COOK TIME cannot be
press and hold the
CLEAWOFF pad for 10 seconds.
set if the door is in the locked position.
11