Filter
Top Products
COm
S~ACE
~
MOD~E
How to
hseti
the Module
1.
Be sure the controls are turned
2. Slide the module toward the
3.
hwer
the inside edge of the
to OFF. To install the module,
outiet
in the side of the cooktop
module into the cooktop
untd
position the plug to the outside
until the plug is pushed
dl
the
it is flush with the cooking
wdl
of the cooktop.
way
h.
surface.
How to Remove the Module
1.
Be sure the controls are turned to OFF and the
3. To unplug, hold the
modtie by the front and back
surface units are cool before attempting to remove edges and slide toward the center of the cooktop.
the module.
Lift out when unplugged.
2. Lift up the tab at the inside edge of the
modde 4. If you are storing
modties,
do not stack them or
until the base clears the opening at the side of
store other
matends on top of them. This could
the cooktop.
damage the surface of the moddes.
Coo&am
Right
Use medium- or heavy-weight
mohare.
Auminum
cookware conducts heat faster than other metals.
Cast-iron and
mated cast-iron cookware are slow to
absorb heat but generally cook
evedy
at low to
medium heat settings. Steel pans may cook
unevedy
if not combined with other
metis.
For best rooking
restits
pw
shotid be flat on the
bottom. Match the
stie of the saucepan to the
she
of
Not over 1 inch
the
surfa~
unit. The pan should not
esend
over the
edge of the surface unit more than 1 inch.
Wrong
Over 1 inch
Nways read and follow cookware manufacturer’s
instructions on
mokware
use.
—
10