GE JSP40 Oven User Manual


 
Before YouCall ForService...
Troubleshooting -tips
Possible Causes What To Do
Display flashes Power failure. Reset the clock.
Unable toget the Oven control pads were * The BAKE and BROIL HI/LO pads must be pressed
display to show "SF" not pressed properly, at the same time and held for 3 seconds.
Power outage, Power outage or surge. * Reset the clock. If the oven was in use, you must reset
clock flashes it by pressing the CLEAR/OFF pad, setting the clock
and resetting any cooking fimction.
"Burning" or "oily" This is normal in a new * To speed the process, set a self:clean cycle for a
odor emitting from oven and will disappear lllinilllllnl of 3 hours. See the Using the self-
the vent in time. cleaning oven section.
Strong odor An odor from the insulation * This is temporary.
around the inside of the oven
is normal for the first few times
the oven is used.
Fan noise A cooling fan may
automatically turn on and
off to cool internal parts.
* This is normal. The cooling f_m will turn off and on.
32