Filter
Top Products
Auto Recipe
™
Conversion (on some models)
When using convection bake, the Auto Recipe
™
Conversion feature will automatically convert
entered regular baking temperatures to
convection baking temperatures.
This feature is activated so the display
will show the actual converted (reduced)
temperature. For example, if you enter a regular
recipe temperature of 350°F and press the
START pad, the display will show CON
and the converted temperature of 325°F.
NOTE: This feature does not convert convection
bake cooking times, only regular baking
temperatures.
To deactivate the feature:
Press the BAKE and BROIL HI/LO
pads (on double oven models, use
the upper oven controls) at the
same time for 3 seconds, until the
display shows SF.
Press the CONVECTION BAKE pad.
The display will show CON ON. Press
the CONVECTION BAKE pad again.
The display will show CON OFF.
Press the START pad.
To reactivate the feature, repeat steps 1–3
above but press the START pad when
CON ON is in the display.
Safety Instructions
Operating Instructions Care and Cleaning
Troubleshooting Tips Consumer Support
7
ge.com
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the CLEAR/OFF pad is pressed. This continuous
6-second beep may be canceled.
To cancel the 6-second beep:
Press the BAKE and BROIL HI/LO
pads (on double oven models use
the upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
Press the KITCHEN TIMER ON/OFF
pad. The display shows CON BEEP
(continuous beep). Press the
KITCHEN TIMER ON/OFF pad
again. The display shows BEEP.
(This cancels the one beep every
6 seconds.)
Press the START pad.
NOTE: On double oven models, this cancels the
end-of-cycle tone for both ovens.
Tone Volume
This feature allows you to adjust the tone
volumes to a more acceptable volume. There are
three possible volume levels.
Press the BAKE and BROIL HI/LO pads
(on double oven models, use the
upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
Press the OVEN LIGHT ON/OFF pad.
The display will show 2 BEEP. This is
the middle volume level.
Press the OVEN LIGHT ON/OFF pad
again. The display will show 3 BEEP.
This is the loudest volume level.
Press the OVEN LIGHT ON/OFF pad
again. The display will show 1 BEEP.
This is the quietest volume level.
For each time the level is changed,
a tone will sound to provide an
indication of the volume level.
Choose the desired sound level
(1 BEEP, 2 BEEP, 3 BEEP).
Press the START pad to activate the
desired level shown.
NOTE: On double oven models, this activates this
special feature for both ovens.