Filter
Top Products
How to Use the Minute/Second
~mer
The MIN/SEC
T~R
has three
timing functions:
. It operates as a minute timer.
● It can be set to delay cooking.
. It can be used as a hold setting
after defrosting.
The MIN/SEC TIMER operates
without microwave energy.
How to
he
a3-~nute
Phone
Cdl
1. Touch MIN/SEC TIMER pad.
The display shows”: O“ and
“ENTER TIME” flashes.
2. Touch number pads 3,0 and O
(for 3 minutes and no seconds).
Display shows
“3:00” and
“~E~’
3. Touch START. Display shows
time counting down.
4. When time is up, oven signals,
flashes
“EndJ’ and display shows
time of day.
Programming a Holding
me
The Minute/Second Timer can
dso
be used to program a holding time
betwmn
mi~
e cooking functions.
The time can range from one second
to 99 minutes and 99 seconds. A
hold or “standing time” maybe
requested in some of your own
recipes or the cooking guide.
Programm
ing
Delayed
Cooking
To delay cooking
up to
99
minutes
and 99 seconds, touch
~E
COOK I
and enter cooking time. Then,
touch MIN/SEC
~ER
and enter
number of minutes to delay cooking.
Touch START. Timer will count
down to zero and cooking will
begin.
How to
he
Defrost, Hold
and
me
Cook
Let’s say you want to defrost a frozen
casserole for
E
minutes, hold for
10 minutes and then Time Cook for
25 minutes. Here’s how to do it:
Step 1:
Take casserole from freezer
and place in oven.
S@p2:
Touch
~E
DEFROST pad.
The display shows “: O“ and
“POWER
3V’
“ENTER DEF
TIME” flashes.
Step 3:
Touch pads 1,5,0 and O for
B
minutes defrosting time.
“ti:OO”
appears on display. (Defrosting is
automatically set on power level 3
but can be changed by touching
the POWER LEVEL pad and the
desired power level.)
Step
4: Set holding or standing
time by touching
M~/SEC
~ER.
The display shows “: O“ and
“ENTER TIME” flashes.
Step 5:
Touch 1,0,0 and O to hold
for ten minutes.
“10:00”
appears on
display and “TIME” flashes.
Step 6:
Touch TIME COOK I pad.
The display shows “: O“ and
“POWER
10V’
“ENTER COOK
TIME 1“ flashes.
Step 7: Touch 2,5,0 and O for
Wenty-five
minutes of cooking time.
“COOK TIME 1“ flashes, “25:00”
and “POWER 10” appear on display.
Step
8:
Touch
ST~.
“DEF
~E”
and
“U:OO”
counting down show on
display. As each function is
automatically performed, oven
display shows instructions entered
and the function.
Step 9:
When time is up, the
oven signals, flashes “End” and
shuts off.
Questions and Answers
Q. What will happen if I
accidentally reverse my defrost,
hold and cook instructions?
A. The oven will automatically
rearrange your program. Defrosting
will always come first, then hold,
and then the cooking function.
Q. Can I defrost and hold only?
A. Yes.
Sometimes you may only
want to defrost a food, hold it, and
cook it later. All you need to do is
program in Time Defrost and
amount of time. Then program a
holding time
(emple
in steps 4
and 5 at left). Be sure to put the
thawed dish in the refrigerator
promptly.
N~E:
Let foods remain at room
temperature only as long as safe.
Times will vary.
Q. I programmed my oven for
a specific defrosting time but it
defrosted longer than necessary.
What happened?
A. When instructions conflict,
the oven carries out the last
instruction. You may have set the
oven to defrost for 4 minutes, hold
for 2 minutes, and then defrost for
6 minutes. In this case, the oven
would defrost for 6 minutes and
hold for 2 minutes.
8