Filter
Top Products
12
FRESH SELECT ZONE
TM
DRAWER GUIDE
Fresh Function
•
By pressing the “Fresh Select Zone” button, you can select proper temperature function for your foods.
•
It changes in sequence Soft Freeze, Chill, Cool and Fresh.
Soft Freeze
•
You can use “Soft Freeze” function to help keeping meat and fish fresh for longer than the Fridge.
•
When "Soft Freeze" mode is selected, the compartment temperature will be approximately - 5°C(depending on the
ambient temperature & amount stored).
- Meat can be stored safely for a longer period of time in this mode than in the other modes and has the advantage
that the meat will remain soft enough to be easily sliced.
- Do not put bottles and glass containers or foods that have a high water content as these are liable to burst due to
the low temperature"
Chill
•
You can use “Chill” function to help keep fresh at about -1
°C.
•
At -1°C, near the water Freezing temperature, foods can be stored safely for longer than the refrigerating tempera-
ture.
- Do not put bottles and glass containers or foods that have a high water content in the drawer, because the “Chill”
temperature is below 0
°C.
Cool
•
“Cool” function keeps the fridge setting temperature.
For example, if the Fridge is set to 3
°C, the Fresh Select Zone will be the same.
•
Also in this function the humidity of this compartment is high by TDM system.
- If you put foods that contain a lot of water without lids or wrapping paper, water droplets may form on the side
wall, because of high humidity.
Fresh
•
You can use “Fresh” function to help keep vegetables and fruits fresher.
•
“Fresh” temperature is about 4
°C. The humidity is kept high to store veggies and fruits by the TDM system.
Upper Drawer
•
The humidity in the drawer is high when fresh food is stored in “Cool” or “Fresh” mode.
Drawer
•
You can also store bottles in “Fresh” mode.
The humidity in the drawer is kept high in “Cool” and “Fresh” mode.