Filter
Top Products
11
Customer ServiceTroubleshooting Tips
Operating InstructionsSafety Instructions
Installation Instructions
Under the Refrigerator
For most efficient operation, keep the
area under the refrigerator clean. Remove
the base grille and sweep away or vacuum
up dust.
For best results, use a brush specially
designed for this purpose. It is available
at most appliance parts stores.
Preparing for Vacation
For long vacations or absences, remove
food and unplug the refrigerator. Move
the control to the
OFF
position, and clean
the interior with a baking soda solution
of one tablespoon (15 ml) of baking soda
to one quart (1 l) of water. Leave the
doors open.
If an icemaker is installed, move the
icemaker feeler arm to the
STOP
(up)
position and shut off the water supply to
the refrigerator.
Preparing to Move
Secure all loose items such as grille,
shelves and drawers by taping them
securely in place to prevent damage.
Be sure the refrigerator stays in an upright
position during moving.
Replacing the Light Bulb
To replace a burned-out bulb, unplug the
refrigerator from its electrical outlet.
In the refrigerator compartment,
remove the
lens cover by gently applying pressure to the
side of the lens cover and pull the cover free
from the control housing. Unscrew the bulb
when cool and replace it with an appliance
bulb of the same or lower wattage.
In the freezer compartment,
simply unscrew
and replace the bulb after ensuring the
refrigerator is unplugged.
Turning the control to the OFF position does not
remove power to the light circuit.
Clean the condenser coils at least
twice a year.