Customer ServiceTroubleshooting Tips
Operating InstructionsSafety Instructions
Installation Instructions
Read these instructions completely and carefully.
Reversing the door swing.
Before You Begin
When reversing the door swing:
■ Read the instructions all the way through
before starting.
■
NOTE:
Doors on stainless steel models are not
reversible.
■ Handle parts carefully to avoid scratching paint.
■ Set screws down by their related parts to avoid
using them in the wrong places.
■ Provide a non-scratching work surface for the doors.
These instructions are for changing the hinges from the
right side to the left side.
If you ever want to change the hinges back to the
right side, follow these same instructions (merely
reverse all references to left and right).
Unplug the refrigerator from its electrical outlet.
Empty all door shelves including the dairy
compartment.
Tools Required
■ Masking tape
■ Phillips screwdriver
■ Putty knife or thin-blade screwdriver
■ Square head #2 screwdriver
■ 7/32″, 5/16″ and 3/8″ sockets and ratchet
(6-point sockets are recommended)
Removing the Doors
Remove Refrigerator Door (Top Door)
Tape the door shut with masking tape.
Remove the hinge cover (on some models).
With a 5/16″ socket, remove the two screws that
hold the top hinge to the cabinet.
Lift the hinge straight up to free the hinge pin
from the socket in the top of the door.
Remove tape, tilt the door away from the
cabinet and lift it to free its bottom socket from
the hinge pin on the center hinge bracket.
Set the door on a non-scratching surface with
the outside up.
e
d
c
b
a
Remove Freezer Door (Bottom Door)
(For models with a freezer drawer, complete step 2b only.)
Tape the door shut with masking tape.
Remove the hinge pin with a 7/32″ socket and
ratchet.
Remove tape, tilt the door away from the
cabinet. Remove and save the washer on the
hinge pin.
Lift the door straight up to free its bottom socket
from the pin in the bottom hinge bracket.
d
c
b
a
13
Plastic Washer
Hinge Pin
Center Hinge Bracket
Freezer Door