Filter
Top Products
12
Installation
Stainless Steel Interior Dishwasher
Step 5
Level the
Dishwasher
Step 6
Slide
Dishwasher
Into Opening
• Carefully upright the dishwasher, taking
care not to bend the leveling legs. Make
sure the leveling leg locking nuts are
secure.
• Check to be sure the dishwasher is level and
at the cutout height.
• Insert drain hose into the hole previously
drilled in the cabinet wall.
• Slide the dishwasher into the opening a few
inches at a time.
• As you proceed, pull the drain hose
through the cabinet wall under the sink.
• If a power cord is used, guide the end
through a separate hole.
• Check to be sure there is no interference
with waterline or house wiring.
Step 7
Connect
Water Line
• The water supply line should be flushed to
clear any foreign material before connect-
ing to the dishwasher.
• Make sure there are no sharp bends or
kinks which could restrict the water flow.