Filter
Top Products
17
ZPF25 Custom Door Panel Kit
1/4" Thick Custom Door Panel
• Place the supplied metal door on a flat
surface.
• Place the custom panel on top of the metal
door.
• Place supplied trim over the custom panel.
• Press trim to panel and install the color
matched screws provided. Install 3 screws
on each side and 2 screws on the bottom.
Step 3
Assemble
Panel to
Door
• Turn the assembled door over with appear-
ance side down.
• Install center door bracket onto door using
original screws.
• Place insulation around support bracket.
Step 4
Install Door
Center
Bracket
Step 2
Remove
Existing
Metal Door
• Open the door fully.
Caution: One person should hold the door
while the other backs out screws to prevent
the metal door from falling.
• Remove 6 screws on the inside the inner
door frame. Retain screws.
• Remove the 2 screws with o-rings located in
the bottom center of the inner door. Retain
screws and o-rings.
• Remove the outer door.
• Remove the 2 screws holding the center
door bracket to metal door.
• Retain bracket and insulation.
• Discard metal door.
Door Trim
Door Panel
Decorative Panel
Insulation
Install Screws