Filter
Top Products
21
Removing
and Cleaning
the Spray
Arms and
Glass Trap
Periodically, remove and clean the spray arms
to make sure that none of the nozzles have
become blocked.
To remove the lower spray arm, grasp the
center of the spray arm and pull upwards, it
will unclip. When replacing, make sure the
spray arm is fully seated and spins.
The plastic cone on the underside of the spray
arm can be detached by unscrewing it
counterclockwise.
To remove the upper spray arm, carefully
unscrew the spray arm from the plastic tower.
To achieve this, hold the inner tower steady
and unscrew the spray arm clockwise. To
replace the spray arm, carefully screw the spray
arm counterclockwise onto the inner tower.
To clean the upper and lower spray arms, rinse
them under running water and make sure
spray nozzles are clear.
The glass trap is located in the stainless steel
filter at the base of your dishwasher. The glass
trap is used to collect larger food items and
other foreign objects, which may be too big to
pass through the drain pump. For best wash
performance, check the glass trap occasionally.
To remove the glass trap, twist counterclockwise,
rotate the glass trap
and lift. To clean the glass
trap, empty and rinse thoroughly. To replace,
reverse these steps making sure the glass trap
locks into place.
Pull up to remove
Rotate counterclockwise
and lift to remove glass trap
Rotate counterclockwise to
remove cone