Filter
Top Products
16
INSTALL FILTERS
• Remove protective film on filters.
• Tip the filter into the lower channel at the rear
of the opening. Push back, lift and pull the knob
forward until the filter rests on the channel.
• Install all three metal grease filters.
•
Turn power on. If the filter light on the control panel
glows, adjust the right-side filter in the channel to
engage the switch arm.
10
294Dia5
Lower Filter
Channels
658Dia26
FINALIZE INSTALLATION
• Remove the protective film covering the control panel
on the front face of the hood and any other packaging
materials.
• Make sure the filters are seated properly when
installed and the filter light is not on.
• Be sure fan and lights operate correctly. Refer to
the Owner’s Manual for operating instructions
and the Problem Solver.
11
Installation Instructions
INSTALLATION – VENTED TO THE OUTSIDE
294Dia7