Filter
Top Products
28
OPERATING THE SELF-CLEANING OVEN
(continued)
To Stop a Clean Cycle
1. Press CLEAR/OFF. 2. When the oven has cooled below the locking
temperature and the LOCKED DOOR light goes
off, open the door.
CLEAR
OFF
Questions and Answers
Q. If my oven clock is not set to the correct time
of day, can I still self-clean my oven?
A. If the clock is not set to the correct time of day
you will not be able to set a delay clean to end
at a specific time.
Q. Can I use commercial oven cleaners on any
part of my self-cleaning oven?
A. No cleaners or coatings should be used around
any part of this oven. If you do use them and do
not thoroughly rinse the oven with water, wiping it
absolutely clean afterward, the residue can scar
the oven surface and damage metal parts the next
time the oven is automatically cleaned.
Q. What should I do if excessive smoking occurs
during cleaning?
A. This is caused by excessive soil. Turn the oven
off. Open the windows to rid the room of smoke.
Wait until the oven has cooled and the words
“LOCKED DOOR” are off in the display. Wipe
up the excess soil and reset the clean cycle.
Q. Is the “crackling” or “popping” sound I hear
during cleaning normal?
A. Yes. This is the sound of the metal heating
and cooling during both the cooking and
cleaning functions.
Q. Should there be any odor during the cleaning?
A. Yes, there will be an odor during the first
few cleanings. Failure to wipe out excessive soil
might also cause a strong odor when cleaning.
Q. What causes the hair-like lines on the enameled
surface of my oven?
A. This is a normal condition, resulting from
heating and cooling during cleaning. These lines
do not affect how your oven performs.
Q. Why do I have ash left in my oven after
cleaning?
A. Some types of soil will leave a deposit which is
ash. It can be removed with a damp sponge or
cloth.
Q. My oven shelves do not slide easily. What is
the matter?
A. After many cleanings, the oven shelves will lose
their luster and become hard to slide. To make the
shelves slide more easily, wipe the shelf supports
with cooking oil.
Q. My oven shelves have become gray after the
self-clean cycle. Is this normal?
A. Yes. After the self-clean cycle, the shelves will
lose some luster and discolor to a deep gray color.
After Self-Cleaning
You may notice some white ash in the oven. Just wipe
it up with a damp cloth after the oven cools.
If white spots remain, remove them with a soap-filled
steel wool pad. Be sure to rinse thoroughly with a
vinegar and water mixture. These deposits are usually
a salt residue that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
NOTE:
• No functions can be programmed before the door
automatically unlocks.
• If the shelves have become hard to slide, wipe the
shelf supports with cooking oil.