Filter
Top Products
Installation
Component Cooking Surfaces
h
Installation
If necessary, the blower maybe rotated 90° k either
Step
/
(continued)
direction, or relocated to opposite side of vent housing.
“ Remove filter from vent housing with Phillips
screwdriver.
Reorient
blower
o Remove blower side plate
nutdriver and set aside.
(four nuts) with 5/1 6“
. Remove blower (four nuts) with 7/16“ socket wrench
from inside vent housing and set aside.
“ Remove blower, rotate to new position and reinstall.
- Replace and tighten four nuts using 7/ 16“ socket
wrench inside vent housing.
- Replace blower side plate and secure (four nuts) using
5/1 6“ nutdriver.
“ Reposition filter inside throat of vent housing.
D/agram 541
Diagram S42
Dfagram543
!hagram544
54