Filter
Top Products
11
Cast-iron burner grates should be washed
regularly and especially after spillovers. Wash
them in hot, soapy water and rinse with clean
water. Dry grates with a clean cloth. The grates
may also be cleaned in a dishwasher.
When replacing grates, be sure that they are
positioned securely over the burners.
Model ZGU384: Replace the two side grates so
that a continuous “arc” is formed with the center
ribs of both grates. Make sure both grates are
stable and level.
Model ZGU385: Replace the two side grates with
their locking rails toward the center grate so that
a continuous “arc” is formed with the center ribs
of all three grates. Make sure the center grate is
locked into position over the rails on the side
grates and that all grates are stable and level.
To get rid of burned-on food, place the grates in
a covered container or plastic bag. Add 1/4 cup
of ammonia and let them soak for 30 minutes.
Wash, rinse well and dry.
Although they are durable, the grates will
gradually lose their shine, regardless of the
best care you can give them. This is due to their
continual exposure to high temperatures.
Do not operate a burner for an extended
period of time without cookware on the grate.
The finish on the grate may chip without
cookware to absorb the heat.
Rubber Grate Feet
For stability, the base of your grates has
rubber feet. If any of these feet should become
damaged or lost, replace them immediately.
To order replacement rubber grate feet, please
call our toll-free number:
National Parts Center . . . . . . . . . . .800.626.2002
Rubber Grate Feet Part No. . . . . .#WB02T10101
Burner grates
Care and Cleaning
Gas Cooktop
Arc
Arc
Locking
Rails
Arc
Arc