Filter
Top Products
Page 17
SIMPLE MAINTENANCE AND REPAIR
DO NOT USE VEGETABLE OIL TO LUBRICATE SLICER.
VEGETABLE OIL WILL DAMAGE THE SLICER!
Sharpener Shafts
It is necessary to lubricate the sharpener shafts with Globe oil weekly.
1. Put several drops of Globe oil on the shaft behind each
sharpening stone (Fig. 17-1).
2. Push and pull the buttons (Fig. 17-1) on the sharpener
to distribute the oil on the shafts.
3. Wipe off any excess oil that drips onto the sharpener.
End Weight Slide Rod
The end weight slide rod should be lubricated weekly
with a few drops of Globe oil.
1. Apply a few drops of Globe oil to the slide rod (Fig. 17-2).
2. Slide the end weight up and down to distribute the oil.
Globe recommends that an authorized Globe service
company perform all adjustments and major maintenance.
By adequately maintaining your slicer,
it will provide years of dependable service.
Figure 17-1
Figure 17-2
Shaft
Shaft
Buttons
Slide Rod